Selective Pallet Racking
The System that makes posible the access to all locations
Customizable design using standard components
A complete list of Accessories at your disposition
Selective Pallet Racking There are no products in this category.
APERSA has 4 upright sections in different thicknesses:
AP7663: The smallest in the range. Available in thicknesses of 1.5 and 1.8mm.
AP7679: Excellent properties of the section. Available in thicknesses of 1.8 and 2.3mm.
AP10081: The entry upright of the Serie 100AP. Available in thicknesses of 1.8 and 2.3mm.
AP100105: For applications that require frames with high load capacity. Available in thicknesses of 2.5 and 3.0 mm.
All uprights are made with steel with quality S355JR.
Finishing Blue RAL 5019 poder coated.
Tubular and C Rollformed Beams
Tubular beams with sections: 80x40 | 100x50
Rollformed beams with sections: 80x40 | 100x40 | 100x50 | 120x50 | 140x50 | 150x50
Thicknesses of 1.5 and 2.0mm.
Lengths from 1.850 to 3.600mm.
Design the beam you may need with the APERSA Beam Calculation APP.
APERSA 5 pins conector. Three rigidity options in one single part.
Build your rack frames with APERSA diagonals and horizontals
Available in four different sections: UZ20 | CZ36 | CZ40 | CZ42.
Thickness 1.5 mm.
Quality S250GD sendzimir Z275.
Lengths for frames with depth 800, 900, 1000 and 1100mm available in stock.
APERSA has welded and folded upright bases.
Bases available for uprights with front 76 and 100mm.
Welded bases bolted to the front and to the side of the uprights.
Finishing Blue RAL 5019 powder coated.
Folded bases bolted to the front of the upright.
Finishing in hot dip galvanised (HDG).
APERSA’s accessories meet the needs of the users:
Safety Beam Lock